Konica Minolta eCopy - Manual (Page 214)

206 | Installation Environment
Managing firewalls
If you installed Windows XP SP2, there is a Windows Firewall section in Control Panel and the
firewall is on by default. Under the
Exception tab, you must add the following programs:
■ ShareScanOPManager.exe
■ ShareScanOPAgent.exe
■ MMC.exe
■ InboxAgent.exe
■ SQLServer.exe (if you are using the Internet Address Book)
Device worksheet
Copy and complete the worksheet below for each eCopy-enabled device that you plan to use with
ShareScan OP.
Notes Device Example
Model eCopy-enabled device.
Location Physical location of the device. 1-B32
Language English
IP address (or DHCP) Domain-based networks: eCopy
recommends that you use static IP
addresses.
Workgroups: You must use static IP
addresses.
10.10.10.68
Gateway address Leave blank unless required by other
applications. <blank>
Primary DNS server Domain-based networks: Not required.
However, if you do not specify a DNS
server, the Services Manager PC must have
a static IP address.
Workgroups: Leave this field blank.
10.10.10.10
Secondary DNS server Leave blank. <blank>
Domain name Enter a name, if applicable. ecopy