Konica Minolta eCopy - Manual (Page 61)

eCopy ShareScan OP Installation and Setup Guide | 53
To enter a product key manually:
1 In the console tree, click System Information > Licensing .
2 Click <ENTER PRODUCT KEY> to make the edit field active, enter your product key in the field,
and then press E NTER .
or
Click New Key and enter your product key in the dialog box. The system automatically fills in
the remaining fields with information about the product key.
3 Click OK .
When you add a product key for a ScanStation, the Select Source dialog box opens. Select the
appropriate TWAIN driver and then click Select . The system adds the ScanStation to the list of
devices and displays the Product Key Information dialog box. You can immediately activate the
key via the Internet (recommended), or activate it later (see “Activating licenses” on page 55).
When you add a product key for a device running embedded ShareScan OP software, the
License Information tab displays product key information. You must now add the device (see
“Adding a device with an embedded client” on page 54).
To import product keys:
Use this method only when licensing devices with embedded clients.
1 Create a text (.txt) file containing all your product keys, or, if you received a CD with product
keys, access the text file on the CD. If you received your product keys by e-mail, you can copy
and paste them into Notepad and save the file with a .txt extension.
Make sure you enter the product keys accurately. The Load Keys function does not report
invalid keys.
2 In the console tree, click System Information > Licensing .
3 Click Load Keys .
4 Select the text file containing the product keys and click Open . The License Information tab
displays the imported keys.
Deleting product keys
You should only delete a key if you are upgrading the license type, for example, if you are
upgrading the key from Evaluation to Full Product. If you delete a key that has been activated, you
may lose the use of that key.
Note: If you assign a device to another ShareScan OP Services Manager, the license moves with the
device; therefore, you do not need to delete the key manually.