Konica Minolta eCopy - Manual (Page 9)

eCopy ShareScan OP Installation and Setup Guide | 1
Getting Started
About this guide
This guide is intended for administrators responsible for installing and configuring eCopy
ShareScan® OP. It provides a product overview and describes system requirements and installation
procedures.
Further information
The documentation set consists of the following documents:
■ eCopy ScanStand™ Assembly Instructions: Provides information about assembling the
ScanStand that is used with eCopy ScanStation.
■ ShareScan OP Installation and Setup Guide: The Quick Start section of this document guides
you through the initial installation and setup process. The Reference section provides more
detailed information about configuring the system, the eCopy connectors included with the
software, and the add-on eCopy Services. It also describes how to manage the client application
and use the ShareScan OP connectors.
■ ShareScan OP Help: The Help files contain information about configuring the system, the
connectors, and the scanning devices. You can easily access the Help from the console.
To access the ShareScan OP Administration console help, in the console tree, select a
node, such as “ShareScan OP” and then click the Help button. The Help opens in the
Microsoft Management Console.
To access help for a specific connector, in the console tree, select the connector and then
click the Connector Help button, or right-click the connector name and select
Connector Help from the menu.