Replacing super-struts – Fluid Management 5G-HD Harbil 5-Gallon Shaker User Manual
Page 46
44 | Harbil 5G Mixer
Fluid Management Customer Service 1 . 800 . 462 . 2466
Read all the directions carefully. If you do not feel comfortable disassembling the
mixer or replacing a part, do not attempt the procedure. Refer to the Parts Section
for component identification and location.
Removing the External Panels
1.
Unplug the electrical cord.
2.
Remove the top cover and lift it off the mixer.
3.
Remove the upper rear cabinet (3-sided piece), front cover, and right and left
side panels (see Figure 5, “Removing the Mixer Covers” page 27).
4.
Set the covers to the side of the work area.
Removing the Super-Struts
1.
Locate the 4 Super-Struts to be replaced.
You will be replacing the struts
on one side at a time.
Figure 16. Locating the Struts
Replacing Super-Struts
Replacing
Super-Struts
Strut
Strut