Fluid Management 5G-HD Harbil 5-Gallon Shaker - Manual (Page 47)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Harbil 5G Mixer | 45
Replacing Super-Struts
2. Locate the hole in the strut pin. Insert the end of the 1/8” hex key into the
hole to prevent the pin from rotating while loosening the bolt. If no hole is
observed, grasp the pin with vice grips and loosen the nut.
Figure 17. Keeping the Strut Pin from Rotating
3.
Beginning on the right side, use a box end or adjustable wrench to remove
the top nuts, washers, and rubber grommets on both struts. Remove the hex
wrench from the hole in the strut pin.
hex wrench