Replacing super-struts – Fluid Management 5G-HD Harbil 5-Gallon Shaker User Manual
Page 49
Advertising
Fluid Management Customer Service 1 . 800 . 462 . 2466
Harbil 5G Mixer | 47
Installing the Super-Struts
Refer to the Super-Strut assembly drawing for parts locations.
Figure 19. Super-Strut Assembly
1.
Beginning with the REAR strut install the new strut body, washers, rubber
grommets, and bottom screw on the outer frame.
Note: When installing the rubber grommets, the two shouldered
ends must face each other with the mounting bracket
between them as shown in Figure 21, “Replacing the Front
Strut” on page 49.
2.
Hand tighten until snug.
Replacing Super-Struts
Advertising