Fluid Management 5G-HD Harbil 5-Gallon Shaker - Manual (Page 54)

52 | Harbil 5G Mixer

Fluid Management Customer Service 1 . 800 . 462 . 2466
10 . Inspect the V-belt and replace if necessary. Check the alignment of the belt
and the pulleys. Now tighten the pulley set screw on the motor pulley.
IMPORTANT Adjust the belt tension to approximately 3/16”
deflection at 5 pounds of pressure before tightening
the motor screws.
Figure 23. Measuring 3/16” Deflection
11. Tighten the 4 mounting screws on the motor while applying tension to the
V-belt.
Replacing Crankshaft
3/16” deflection