2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 12)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
12
www.2n.cz
If you use external and internal lines with call identification support, then fill in the
part Localisation:
International – fill in the international calling code (usually 00)
National – fill in the country code in the national network (for the Czech Republic
(CR) it is 00420)
Local – fill in the local transfer number in the ISDN network (usually 0, not used in
the CR)
In the section Installation you assign who and where is installed in the PBX.
Languages
Select 1-4 user languages from the list of user languages (for key system phone
menus and tags, extension names and personal quick dialling labels).
2.1.4. External lines
•
Minimum ring time. Determines how long the minimum continuous ringing
from an external line must be detected for the external line to be announced as
ringing.
•
Minimum quiet for ring end. It is the pause in the ringing from an external line
after which the ringing from an external line is considered finished.
•
Pause length for dial CO. Enables a pause to be entered between the
numbers dialled. Used in complementary numbers after quick dialling and after
detecting routes.