2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 79)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
79
www.2n.cz
2.10.3. Mobility Extension services
These services are executed based on a command from Mobility Extension.
After detecting the DTMF characters entered on the end of the external telephone
number this service is simulated in the PBX.
Here enter:
FLASH - DTMF characters, after which FLASH (a short line interruption) is to
be generated in the call in order to be able to transfer the call or dial another
service.
Double FLASH - DTMF characters, after which FLASH - FLASH (a short line
interruption, twice after each other) is to be generated in the call. Not designed for
direct use in the PBX.
Hang up - DTMF characters, after which:
- in the case of transferring calls, the transfer is made but the
connection of the external telephone number with the external line is not
terminated and it is possible to continue dialling (calling VL, calling VTS,
calling a service).
- in the case of hesitating to dial (time supervision of dialling the first
and the next digit expires – the subscriber hears a congestion tone), the
dialling tone is heard again and the PBX is ready for receiving dialling.
Password repeat count - maximum number of attempts to enter the user
password for the line (if required).