2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 24)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
24
www.2n.cz
Mess
The name of the voice as it is herein presented in the PBX configuration tool (e.g.
as a DISA parameter in the ringing table).
File
The name of the voice as it is saved in the PBX.
A change to the original voice
-press the key “Load”
-enter the voice created into the “Wav” directory formed.
-right click with the mouse on the voice you want to change.
-select the voice formed that is saved in the “Wav” directory.
-press the key “Save”
Adding a new voice
- press the key “Load”
-enter the voice created into the “Wav” directory formed.
-right click with the mouse in the space for user voices.
- select the command “Add”
- select the voice formed that is saved in the “Wav” directory.
- press the key “Save”
2.1.15. Modem
Changes can be made in the internal modem’s configuration (depending on
the PBX model) for telemonitoring. The basic set up accepts silent running of the
modem. The settings are changed by the AT command. The command is accepted
after carrying out a RESET.