2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 56)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
56
www.2n.cz
VoIP
•
Name – line name of max. 14 characters
•
Without autoris. – the authorisation check will not be performed on this line
•
Private – line connected to the private network, no accounting is performed
•
Prefix – prefix of up to four digits, which will be automatically called after
outgoing occupation of the line as the first (DIN via the superior central). Prefix
is not recorded into the accounting line.
•
Minimum time for accounting – time subtracted from the call time for pseudo-
accounting.
•
Priority – internal line must be of higher priority to use the external line.
•
CLIP – enter, how should the line be identified in the outgoing direction
•
Strip – enter number of digits from the incoming identification, which should be
subtracted in the input direction in order that the remaining digits are the DIN to
the participant of DIN to the ringing table.
•
Dial to VoIP – maximal period for delay of the next selection into the VoIP line.
The time survey is reset after each obtained digit from the internal participant
and after its expiring, the dialling mode is changed to the call mode. If it is
activated, the expiring of the period and end of the dialling is announced by a
short beep. Any other dialling is considered a service into the call.