2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 58)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
58
www.2n.cz
2.5.4. Trunks
The table serves for allocating individual external lines to a bundle. The
maximum number of external lines in the bundle is 24. There are 16 bundles. Every
external line may be in one or more bundles at once. The first eight bundles can use
the service Internal call through a bundle. A cyclic start up for an external line can
be used in the bundle.
2.5.5. Trunks for accessing ringing
The table serves to allocate individual external lines to a bundle for using the
service accessing ringing from a bundle. Every external line can be in one or more
bundles at once.
2.5.6. Ringing
For every external line you can set up the same or a different ringing table for
the DAY and NIGHT regime. The tables are general and the same table can be
used for various ports.
•
DISA – when setting it is possible to call the DTMF by selecting an internal
subscriber
•
Internal numbering plan – a number received during DISA DID will be
compared with the subscribers’ internal numbering
•
DDI numbering plan – the number during DISA DID will be compared with the
subscribers’ DID numbering
•
FAX – when using the DISA command in the ringing table the fax 1100Hz
introductory tone will be detected
•
Modem – when using the DISA command in the ringing table the modem
1300Hz introductory tone will be detected