2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 35)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
35
www.2n.cz
2.2.4. Departments
These tables are used during the Call Department service. In all there are 8
tables with 56 fields available.
2.2.5. Allocating to a group and a department
The table serves to allocate individual internal subscribers to one of two
groups for the purpose of switching from the DAY and NIGHT regimes. One
subscriber cannot be in more than one group. At the same time this is where
individual internal subscribers are allocated to one of eight departments for sorting
ringing. One subscriber can be in more than one department simultaneously.
2.2.6. Calling to a department
If an internal line is using the call a department service, then the call either only
starts on the first free internal line or at the entire department depending on which
group the line belongs to and whether the given department has checked the
parameter Call to the entire department.
2.2.7. Global data
See Global data / internal lines
2.2.8. FLASH settings and the type of dialling
The table is used for setting the minimum and maximum length of the
FLASH on the analogue internal lines. FLASH detection is carried out by windows.
A FLASH signal is only considered to be a disruption to the current by the
subscriber loop that corresponds to the time set in the minimum and maximum
length of the FLASH. By right clicking on the box with FLASH values it is possible
to set the same value in the remaining boxes in the column.
The field “End Flash” is used when it is necessary to detect a break in the
connection to an analogue CO-VL division. The connected analogue CO line must