2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 5)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
5
www.2n.cz
1. The PBX configuration instrument menu
The basic menu for the PBX configuration instrument contains the following items:
1.1. Data
•
New Making a new PBX configuration file
•
Open… Opening a current configuration file
•
Close Closing an open window with a configuration file
•
Save Saving a file
•
Save as … Saving a file under another name
•
Firm values Using the factory settings in the default set up
•
From the PBX Reading the configuration from the PBX
•
To the PBX Saving a configuration into the PBX
•
Reset the PBX Reset the PBX (the same function as turning on and off)
•
Time synchronization Setting the time to the PC which is connected to the
PBX
•
Upload the PBX software Loading firmware into Flash.
•
Reset and boot the PBX from Flash Reset the PBX with firmware
support into Flash and rewriting it into RAM.
•
Freezing the PBX The PBX switches to the service regime. Ongoing calls
are completed other calls cannot be started. This state is indicated by the sign
“PBX repairs!” on the system phones. Afterwards it is possible to turn the PBX
off and change the modules. The PBX switches to the operating state after the
command “Unfreeze PBX” or after turning on or off.
•
Unfreezing the PBX Returning to the operating state.
•
Print actuel window
•
Printing sets
•
Print setup
•
Close the program