2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 33)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
33
www.2n.cz
The permission to receive CLIP on an analogue telephone is carried out in the
marker activation.
- CLIP function – by setting this CLIP will be displayed on analogue
telephone (if the analogue telephone’s connection allows this).
- CLIP function without clinking – in certain cases (wireless phones,
MICROCOM, TOPCOM,..) to receive CLIP it is necessary to set the option of
without ringing. This suppresses the first ringing and the accepted CLIP is
displayed on the second ring.
- DTMF – setting this means the identification of the calling CLIP is sent
using DTMF.
- FSK - setting this means the identification of the calling CLIP is sent using
FSK (the majority of telephones with the CLIP display option support it)
If the telephone is connected with the BT CLIP standard then it is necessary to
allow the BT FSK setting.
-Switch on tape recorder - enable this item to connect all
outgoing/incoming calls to the appropriate AUX output as preset in the Global
data/AUX groups and Groups/Switches, Broadcast, Tape recorder menus.