2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 75)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
75
www.2n.cz
2.10. Mobility Extension
Mobility Extension function enables telephone stations (preferably GSM
telephones to share internal line services (switching, dialling VTS,..) outside the
PBX.
Primary setup is made by the PBX administrator.
2.10.1. Mobility Extension IN
Here you set up the conditions for Mobility Extension in the incoming direction
from the external telephone number (preferably from a GSM telephone).
Enter:
Line - internal that should have the Mobility Extension service
(sharing identical services with an external telephone number) activated. One
internal line has one external telephone number allocated. After being allocated in
one of the menu lines offered (according to the ME license inserted) it will not be
displayed in the following ones.
Name - Name of the external telephone number (enter the name without
diacritics). The name is shown on the display of the system telephone.
Number - external telephone number.
Password - personal password of the allocated internal line. It is the same
as the password set up in the “Internal lines/Operating parameters/Blocking“
MENU. If it is allowed to enter a password it is always necessary, when calling from
this external telephone number, to enter the password first and then further dialling
is possible. The user is asked to enter the password with the following message:
“Enter password”.
Order of used common short dial - after entering the Name and
Number, a new common quick dialling is established, whose ordinal number is
displayed. Always the first free common quick dialling is offered.