2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 91)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
91
www.2n.cz
3.
you must fill in the PBX Serial number.
4. you must fill in a phone number, which will be used for the remote modem
connection.
5. you may enter information about customer and dealer.
6. click /OK/ for confirmation.
7. choose the correct code from the offered codes and write it into the PBX by
pressing „Store Code“. While writing the code, it is necessary to be connected to
the PBX over serial interface.
8.
While writing a new code, you will be notified if a code already exists. By
pressing Ignore button, code will be overwritten.