2N Omega Lite - Configuration Tool manual v1.6 - Manual (Page 62)

2N
®
- OMEGA Lite
Configuration instrument
User’s manual – configuration instrument
62
www.2n.cz
Here are some working examples for illustration.
Action Parameter
Call accessible lines
Call VL 13
Call VL 14
Call VL 15
Call VL 16
Wait 0
Tab. 1
Action Parameter
Call accessible lines
Call VL 12
Wait 10
Don’t call 12
Call VL 14
Wait 5
Call VL 13
Call VL 15
Wait 0
Tab. 2
Action Parameter
Call accessible lines
Call dept. linearly 5
Wait 0
Tab. 3
Tab. 4
Action Parameter
Call dept. cyclic 3
Wait 60
Don’t call
Call voicemail 11
Wait 0
Example 1: During incoming
ringing it has to concurrently ring
lines 13, 14, 15 and 16 and all
lines that have ringing from
external lines accessible. All lines
ring at the same time until one of
them takes the call or the call
ends externally.
Example 2: During incoming
ringing it starts ringing line 12,
after 10 secs it stops on line 12
and starts on line 14. After another
5 secs it transfers ringing to lines
13 and 15. Then all 3 lines ring
until one of them takes the call or
the call ends externally. Of course
it must ring the accessible line
first.
Example 3: During incoming
ringing it rings the group linearly.
Again we bear in mind the lines that
have ringing from external lines
accessible.
Example 4: During an incoming call it
rings group 3 cyclically. Accessible
lines don’t ring. If, after 60 secs, no
one answers it ends on the voice mail
of subscriber 11.