Omega lite configuration instrument – 2N Omega Lite - Configuration Tool manual v1.6 User Manual

Page 77

Advertising
background image

2N

®

- OMEGA Lite

Configuration instrument


User’s manual – configuration instrument

77

www.2n.cz


2.10.2. Mobility Extension OUT

Here you set up the conditions for Mobility Extension in the outgoing direction,

the allocated internal line rings.

Editing the settings for the outgoing direction is only possible if Mobility Extension
IN is entered. Otherwise no MENU is offered.


Line and Name of the respective telephone number (respective common

quick dialling) is automatically transferred to this table from the Mobility Extension
IN settings.

Then enter:

Call at day

- whether outgoing Mobility Extension should be

activated or not if the PBX is in the DAY mode. The setup parameters are “Never,
Immediately, after 1-9 rings”

Warning: If you select Immediately and the outgoing calls are made via GSM

gateway it will take approximately 10 seconds before the external telephone starts
ringing (because of the connection method within the GSM network).

Call at night

- whether outgoing Mobility Extension should be

activated or not if the PBX is in the NIGHT mode. The setup parameters are
Never, Immediately, after 1-9 rings”.

Warning: If you select Immediately and the outgoing calls are made via GSM

gateway it will take approximately 10 seconds before the external telephone starts
ringing (because of the connection method within the GSM network).

Call Type

- enter, over which bundle of external lines the

respective outgoing Mobility Extension should be made. Selected can be only
those bundles that do not include analogue external lines.

Wait for trunk - whether the system should wait until the busy line in the

respective bundle has been released or not. If all lines in the respective bundle are
busy and “Waiting for bundle” is allowed the system waits until the external line in
the bundle is released. Otherwise the outgoing call is not made.

Send SMS

-

The SMS will / will not be sent:

After accepted ME call

-

Called party answers the call on the ME sta on =

call is established.

Answered ME

-

Called party does not answer the call on the ME sta on, but

the call was answered on the ralted extension.

Advertising