Lenze 8400 motec Manual - Manual (Page 86)

Commissioning
Handling of the keypad
6
l
86 EDS84DG752 EN 4.0
General operation
1. Select the desired menu using the navigation key ‚ / ƒ .
– The navigation keys „ / serve to get one menu level higher/lower.
– The function key • serves to get back to the main menu.
2. Select the parameter you want to set within a submenu using the navigation keys
‚ / ƒ .
3. Press the function key ‰ to change to the editing mode.
4. Set the desired value by means of the navigation keys.
– Use the navigation keys „ / to move the cursor to the left/right.
– Use the navigation keys ‚ / ƒ to change the marked digits.
5. Press the function key ‹ to accept the change carried out and quit the editing
mode.
– Use the function key Š to quit the editing mode without accepting the changes.
I
Tip!
Information on how to set parameters with the »Engineer«
can be found in the »Engineer« online help.