Lenze E84AYCIB - Manual (Page 10)

E84AYCIB communication manual (INTERBUS)
About this documentation
Terminology used
10
L
EDS84AYCIB EN 4.0 - 11/2010
1.3 Terminology used
Term Meaning
Standard device Lenze frequency inverter from the "Inverter Drives 8400" product series, with
which the communication module can be used.
 Application as directed ( 14)
Controller
»Engineer« Lenze software, supporting you during the entire life cycle of a machine - from
the planning phase to maintenance.
Code "Container" for one or more parameters which you can use to parameterise or
monitor the communication module.
Subcode If a code contains several parameters, the individual parameters are stored
under "subcodes".
This manual uses a slash "/" as a separator between the code and subcode
(e.g. "C00118/3").
PCP Peripherals Communication Protocol (parameter data transmission)
PD Process data / process data words
PDO Process data object
PDU Process Data Unit
PMS Peripheral Message Specification
HW Hardware
SW Software