Lenze E84AYCIB - Manual (Page 60)

E84AYCIB communication manual (INTERBUS)
Error messages
Possible causes and remedies
60
L
EDS84AYCIB EN 4.0 - 11/2010
12.2 Possible causes and remedies
This chapter includes a list of all error messages of the communication module in
numerically ascending order of the error number. Possible causes and remedies as well as
responses to error messages are described in detail.

Tip!
A list of all error messages of the communication module in alphabetical order is
provided in the previous chapter " Short overview (A-Z) of the INTERBUS error
messages "
( 59)
.
Lost connection to 8400 base device [0x01bc3100]
Memory not accessible [0x01bc5531]
Memory read error [0x01bc5532]
Memory write error [0x01bc5533]
Response (Lenze setting in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Network cable (plug) is defective.
Network cable at INTERBUS terminal X206 (IN) or X207
(OUT) is disconnected.
Check network cable (plug) and replace it, if required.
Plug in network cable at INTERBUS terminal X206 (IN) or
X207 (OUT).
Response (Lenze setting in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Memory could not be accessed. Send module with error description to Lenze.
Response (Lenze setting in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Parameter in the memory module could not be read. Repeat download of the application (including module).
Response (Lenze setting in bold) Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Parameter in the memory module could not be written. Repeat download of the application (including module).