Lenze E84AYCIB - Manual (Page 26)

E84AYCIB communication manual (INTERBUS)
Installation
Mechanical installation
26
L
EDS84AYCIB EN 4.0 - 11/2010
5.1.3 Replacing the communication module
[5-3] Replacing the communication module
Mounting steps
1. Loosen the securing screw for the communication module at the standard device (1).
2. Remove the communication module from the MCI slot of the standard device (2).
3. Insert the new communication module into the MCI slot of the standard device (3).
4. Tighten the securing screw again (4).
E84YCPM002B