Lenze E84AYCIB - Manual (Page 33)

EDS84AYCIB EN 4.0 - 11/2010
L
33
E84AYCIB communication manual (INTERBUS)
Commissioning
Before initial switch-on
6 Commissioning
During commissioning, system-specific data such as motor parameters, operating
parameters, responses, and parameters for fieldbus communication are defined for the
controller. For Lenze devices this is effected via the so-called codes.
The codes of the controller and for communication are saved non-volatilely as a data set in
the memory module.
Additionally there are codes for diagnostics and monitoring of the nodes.

Parameters of the communication module
( 63)
6.1 Before initial switch-on

Stop!
Before switching on the standard device with the communication module for
the first time, check the entire wiring for completeness, short circuit, and earth
fault.