Lenze E84AYCIB - Manual (Page 53)

EDS84AYCIB EN 4.0 - 11/2010
L
53
E84AYCIB communication manual (INTERBUS)
Monitoring
10 Monitoring
Communication fault
 If INTERBUS communication is interrupted, e.g. due to cable break or INTERBUS master
failure, no process data are transmitted to the slave in the
" IBS-ACTIVE "
( 57)
status.
 After the time to be parameterised by the user in C13881 has elapsed, the response
parameterised in C13880/1 is executed in the controller.
Settings in the »Engineer«
Under the Settings tab in the »Engineer« you can set the following parameters:
 Reaction on interrupted INTERBUS communication ( C13880/1 )
 Delete process data ( C13885 )
– Setting of the process data which the controller is to process further for maintaining
internal communication when the INTERBUS has failed.
 Monitoring time for INTERBUS communication failure ( C13881 )