Lenze E84AYCIB - Manual (Page 24)

E84AYCIB communication manual (INTERBUS)
Installation
Mechanical installation
24
L
EDS84AYCIB EN 4.0 - 11/2010
5.1 Mechanical installation
The communication module can be plugged into the MCI slot or removed from there while
the controller is switched on. When the module is plugged in, it is recognised automatically
and checked for plausibility regarding its function and version.
5.1.1 Mounting for standard devices 0.25 kW and 0.37 kW
[5-1] Mounting for standard devices 0.25 kW and 0.37 kW
Mounting steps
1. Use a screwdriver to lever out the cover of the MCI slot of the standard device and
remove it (1, 2).
2. Loosen the securing screw for the communication module at the standard device (3).
3. Insert the communication module into the MCI slot of the standard device (4).
4. Tighten the securing screw again (5).
E84YCPM002D