Lenze E84AYCIB - Manual (Page 63)

EDS84AYCIB EN 4.0 - 11/2010
L
63
E84AYCIB communication manual (INTERBUS)
Parameter reference
Parameters of the communication module
13 Parameter reference
This chapter supplements the parameter list and the table of attributes in the software
manual and the »Engineer« online help for the Inverter Drive 8400 by parameters of the
E84AYCIB communication module (INTERBUS).
13.1 Parameters of the communication module
This chapter lists the parameters of the E84AYCIB communication module (INTERBUS) in
numerically ascending order.
C13850
C13851

Software manual/»Engineer« online help for the Inverter Drive 8400
Here you'll find general information about parameters.
Parameter | Name:
C13850 | All words to master
Data type: UNSIGNED_16
Index: 10725
d
= 29E5
h
Display of the process data words which are transmitted from the communication module to the master.
• Subcodes 1 ... 16 display all process data words to the master. Only those which are configured are valid.
Maximally the first 10 words are relevant to the E84AYCIB INTERBUS module.
Display area (min. value | unit | max. value)
0 65535
Subcodes Information
C13850/1
...
C13850/16
; Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13851 | All words from master
Data type: UNSIGNED_16
Index: 10724
d
= 29E4
h
Display of the process data words which are transmitted from the master to the communication module.
• Subcodes 1 ... 16 display all process data words from the master. Only those which are configured are valid.
Maximally the first 10 words are relevant to the E84AYCIB INTERBUS module.
Display area (min. value | unit | max. value)
0 65535
Subcodes Information
C13851/1
...
C13851/16
; Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT