Lenze E84AYCIB - Manual (Page 59)

EDS84AYCIB EN 4.0 - 11/2010
L
59
E84AYCIB communication manual (INTERBUS)
Error messages
Short overview (A-Z) of the INTERBUS error messages
12 Error messages
This chapter provides the error messages of the communication module as a supplement
to the error list in the software manual and the »Engineer« online help for the Inverter
Drive 8400.
12.1 Short overview (A-Z) of the INTERBUS error messages
The following table contains all error messages of the communication module in
alphabetical order with the preset error response and, if available, the parameter for
setting the error response.

Tip!
When you click the cross-reference in the last column, you will get to the detailed
description (causes and remedies) of the corresponding error message.

Software manual/»Engineer« online help for the Inverter Drive 8400
Here you'll find general information on diagnostics & fault analysis and error
messages.
Error text Error type Subject area
no.
Error no. Adjustable
in
Detailed
information
Communication stack reset Error 444 33062 - 0x01bc8126
Data exchange stopped No response 444 33073 C13880/1 0x01bc8131
Internal error Error 444 24592 - 0x01bc6010
Internal error Error 444 24593 - 0x01bc6011
Internal error Error 444 24832 - 0x01bc6100
Internal error Error 444 24833 - 0x01bc6101
Invalid configuration Warning 444 33061 - 0x01bc8125
Invalid initialisation Warning 444 33063 - 0x01bc8127
Invalid module configuration Error 444 25648 - 0x01bc6430
Invalid parameter set Error 444 25631 - 0x01bc641f
Lenze setting loaded Error 444 25632 - 0x01bc6420
Lost connection to 8400 base device Error 444 12544 - 0x01bc3100
Memory not accessible Error 444 21809 - 0x01bc5531
Memory read error Error 444 21810 - 0x01bc5532
Memory write error Error 444 21811 - 0x01bc5533