Lenze E94ASHExxxx - Manual (Page 107)

Wiring the device modules
Function modules
6

107 EDK94SH366 DE/EN/FR/ES/IT 3.1
6.2 Function modules
Use these modules in slot ; MXI1 or ;MXI2 †MMI †MSI.
Digital frequency
E94AYFLF004
Connections
Pos. Description
X9 Input for digital frequency, 9-pole Sub-D plug
X10 Output for digital frequency, 9-pole Sub-D socket
X9 Pin Designation Explanation
1 6
5 9
1 B
TTL input signal from encoder or encoder simulation 2 A
3 A
4 +5 V Regulated voltage supply for encoder
(pin 8 = sense has to be used)
5 GND -
6 Z
TTL input signal from encoder or encoder simulation
7 Z
8 The function of this lead has to be set in the standard device:
z
S
z Lc
z E
z
Sense (sensor lead for voltage regulation, Lenze setting)
z Lamp control
z Enable
SUBD09010
9 B TTL input signal from encoder or encoder simulation