Lenze E94ASHExxxx - Manual (Page 115)

Wiring the device modules
Safety modules
6

115 EDK94SH366 DE/EN/FR/ES/IT 3.1
Connections
Pos. Description
 PROFIsafe target address switch (on left side of housing)
X82.1
Pluggable terminal strips for input and output signals
X82.2
X82.3
X82.4
Addressing
An unambiguous PROFIsafe target address ensures that a data telegram reaches the
correct node.
DIP switch  Labelling
1 2 3 4 5 6 7 8 9 0
Value of the address bit 1 2 4 8 16 32 64 128 256 512

Note!
The combination of a safety module SM300 of version VA 1.08 or higher and a
PROFIBUS communication module of version VB 0.93 or higher makes it
possible to avoid the error that occurs when an address is set to 0. For this
purpose, a defined PROFIsafe target address must be stored in
C13897 or 14897 of the PROFIBUS communication module.
Terminal assignment
X82.1 Labelling Description
n. c.
This terminal strip is not assigned.
n. c.
n. c.
n. c.
n. c.
n. c.
n. c.
n. c.
n. c.
X82.2 Labelling Description
- GND external supply
+ 24 V external supply via a safely separated power supply unit (SELV/PELV)
n. c.
This part of the terminal strip is not assigned.
n. c.
n. c.
n. c.
AIE
Error confirmation input (Acknowledge Input Error)
CLA Clock output for passive sensors, channel A (clock A)
CLB Clock output for passive sensors, channel B (clock B)