Lenze CANopen control technology - Manual (Page 100)

Control technology | CANopen communication manual
Appendix
»PCAN-View« for diagnostic purposes
100
L
DMS 4.2 EN 07/2011 TD17
Now the CAN telegrams are constantly displayed in the "Receive" and "Transmit"
windows:
On the basis of the IDs displayed and the IDs in your overview you can assign the telegrams
to the devices.
If no telegrams are displayed, there may be several causes:
• Is your Engineering PC connected to the correct CANopen bus?
• Is the correct system bus adapter activated under "System control, CAN hardware“?
• What does it say in the status bar of the »PCAN-View«?
If it says "Bus Heavy" mostly a node with an incorrect baud rate interferes with the bus
communication.
• Are the devices in the "Operational" state?