14 parameter reference, Parameter reference – Lenze CANopen control technology User Manual
Page 96
Control technology | CANopen communication manual
Parameter reference
96
L
DMS 4.2 EN 07/2011 TD17
14
Parameter reference
This chapter adds the parameters of the MC-CAN2 communication card to the parameter
list provided in the online documentation for the Industrial PC:
Parameters of the MC-CAN2 communication card in slot 1
Parameters of the MC-CAN2 communication card in slot 2
Tip!
General information about parameters is provided in the online documentation for
the Industrial PC.
Note!
• Several MC-CAN2 communication cards can be used per Industrial PC. The
designation of the card in the »WebConfig« is MC-CAN2.
• Depending on the used slot, the code numbers differ by an offset of '500'.
Hence, for a communication card in slot 2, an offset of '500' has been added
to the code numbers of a card in slot 1.