Lenze E84DxxxxxxxxxR User Manual
Page 26
Advertising
![background image](/manuals/566106/26/background.png)
Communication manual 8400 protec PROFINET
Commissioning
Setting the station name
26
L
EDS84DPNET EN 4.0 - 11/2010
In the »Engineer« the station name is set under the Settings tab.
Then click Accept change. The station name is saved and written to code
.
In the Lenze setting a deleted name is displayed. The name is also deleted if the "Reset
to factory defaults" command is executed by an IO supervisor or an IO controller.
Advertising