Lenze E84DxxxxxxxxxR - Manual (Page 51)

EDS84DPNET EN 4.0 - 11/2010
L
51
Communication manual 8400 protec PROFINET
Parameter data transfer
Error information (error)
8.4 Error information (error)
Error code Meaning Description Additional
information
0x0000 Impermissible parameter
number
Access to unavailable parameter -
0x0001 Parameter value cannot be
changed
Change access to a parameter value that cannot be
changed
Subindex
0x0002 Lower or upper value limit
exceeded
Change access with value outside the value limits Subindex
0x0003 Faulty subindex Access to unavailable subindex Subindex
0x0004 No array Access with subindex to non-indexed parameter -
0x0005 Incorrect data type Change access with value that does not match the
data type of the parameter
-
0x0006 Setting not permitted (can
only be reset)
Change access with non-zero value where this is not
permitted
Subindex
0x0007 Description element cannot
be changed
Change access to a description element that cannot
be changed
Subindex
0x0008 Reserved (PROFIdrive Profile V2: PPO-Write requested in IR is
not available)
-
0x0009 No description data available Access to unavailable description (parameter value is
available)
-
0x000A Reserved (PROFIdrive Profile V2: Wrong access group) -
0x000B No parameter change rights Change access without parameter change rights -
0x000C Reserved (PROFIdrive Profile V2: Wrong password) -
0x000D Reserved (PROFIdrive Profile V2: Text cannot be read in cyclic
data transfer)
-
0x000E Reserved (PROFIdrive Profile V2: Name cannot be read in cyclic
data transfer)
-
0x000F No text array available Access to unavailable text array (parameter value is
available)
-
0x0010 Reserved (PROFIdrive Profile V2: No PPO-Write) -
0x0011 Request cannot be executed
because of operating state
Access is not possible for temporary reasons that are
not specified in detail
-
0x0012 Reserved (PROFIdrive Profile V2: Other error) -
0x0013 Reserved (PROFIdrive Profile V2: Date cannot be read in cyclic
data transfer)
-
0x0014 Impermissible value Change access with a value that is within the value
limits but is not permissible for other permanent
reasons (parameter with defined single values)
Subindex
0x0015 Response too long The length of the current response exceeds the
maximum transmittable length
-
0x0016 Impermissible parameter
address
Impermissible value or value which is not supported
for the attribute, number of subindexes, parameter
number, or subindex, or a combination
-
0x0017 Impermissible format Write request: Impermissible parameter data format
or parameter data format which is not supported
-
0x0018 Number of values not
consistent
Write request: Number of parameter data values
does not match the number of subindexes in the
parameter address
-
0x0019 Reserved - -
...
0x0064