Lenze E84DxxxxxxxxxR - Manual (Page 9)

EDS84DPNET EN 4.0 - 11/2010
L
9
Communication manual 8400 protec PROFINET
About this documentation
Terminology used
1.3 Terminology used
Term Meaning
Controller Lenze frequency inverters of the "Inverter Drives 8400 protec" product range
Standard device
»Engineer«
Lenze software which supports you throughout the whole machine life cycle -
from planning to maintenance.
Code "Container" for one or several parameters used to parameterise or monitor the
device.
Subcode If a code contains several parameters they are stored in so-called "subcodes".
This manual uses a slash "/" as a separator between code and subcode
(e.g. "C00118/3").
HW Hardware
SW Software
FW Firmware
I/O controller PROFINET master
The I/O controller takes over the master function for data communication of the
decentralised field devices. The I/O controller is usually the communication
interface of a PLC.
I/O device PROFINET slave
IO supervisor Engineering and diagnostics tools
The IO supervisor can access process data, diagnostic data, and alarm data.