Lenze E84DxxxxxxxxxR - Manual (Page 32)

Communication manual 8400 protec PROFINET
Process data transfer
Preconfigured port interconnection of the process data objects (PDO)
32
L
EDS84DPNET EN 4.0 - 11/2010
7.2 Preconfigured port interconnection of the process data objects (PDO)
The preconfigured port interconnection of the process data objects can be activated by
setting standard device code C00007 = "40: MCI".
The function block editor (FB Editor) serves to display the port blocks "LP_MciIn" and
"LP_MciOut" with the preconfigured interconnections:

Note!
The »Engineer« screenshots shown in the following are only examples of the
setting sequence and the resulting displays.
The data in the display fields may differ from the ones of your project.