Rockwell Automation 20-COMM-P Profibus Adapter - Manual (Page 23)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a complete list of parameters, refer to Appendix B , Adapter
Parameters . For definitions of terms in this chapter, refer to the Glossary .
The PROFIBUS adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page Topic Page
Configuration Tools 3-1 Setting a Fault Action 3-4
Using the PowerFlex HIM 3-2 Resetting the Adapter 3-6
Setting the Node Address 3-3 Viewing the Adapter Configuration 3-7
Setting the I/O Configuration 3-3
Configuration Tools
Tool Refer To:
DriveExplorer Software (version 2.01
or higher) DriveExplorer Getting Results Manual,
Publication 9306-5.3, or the online help
DriveExecutive Software (version 1.01
or higher) DriveExecutive Online Help
PowerFlex HIM page 3-2
20COMM-UM006A-EN-P.book Page 1 Friday, September 28, 2001 10:43 AM