Rockwell Automation 20-COMM-P Profibus Adapter - Manual (Page 31)

Chapter
4
Configuring the Profibus Scanner
Profibus scanners are available from several manufacturers, including
SST. Chapter 4 provides instructions on how to utilize the SST Profibus
configuration software tool to:
• Install the 20-COMM-P GSD file in the software tool library
• Configure the SST-PFB-SLC Profibus Scanner.
In this example, we will be configuring two PowerFlex 70 drives, to be
Station 1 and Station 2 on a Profibus network. This will be the
configuration used throughout the manual, including the ladder
examples. Apart from the node address and scanner mapping, they will
have identical configurations. This chapter describes the steps to
configure a simple network like the network in
Figure 4.1 .
Topic Page
Example Network 4-1
Installing the 20-COMM-P GSD file in the software tool library 4-3
Configuring the SST-PFB-SLC Profibus Scanner 4-5
GSD Diagnostic Messages 4-19
Example Network
20COMM-UM006A-EN-P.book Page 1 Friday, September 28, 2001 10:43 AM