Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module - Manual (Page 23)

Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012 23
Installing the Option Module Chapter 2
Commissioning the Option
Module To commission the option module, you must set a unique network node address.
See the
Glossary for details about node addresses. When using the Node Address
switches, see Setting the Node Address Switches on page 18 for details.
IMPORTANT New settings are recognized only when power is applied to the option module
or it is reset. After you change parameter settings, cycle power or reset the
option module.