Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module - Manual (Page 40)

40 Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012
Chapter 4 Configuring the I/O
2. From the list, select the drive and its connected option module.
For this example, we selected ‘PowerFlex 755-CNETC’.
3. Click OK.
The drive’s New Module dialog box appears.
4. On the General tab, edit the following data about the drive/option module.
5. On the New Module dialog box in the Module Definition section, click
Change to launch the Module Definition dialog box and begin the drive/
option module configuration process.
TIP If the PowerFlex drive is not shown, go to http://www.ab.com/support/
abdrives/webupdate and download the latest RSLogix 5000 drive Add-on
Profile.
Box Setting
Name A name to identify the drive.
Description Optional – description of the drive/option module.
Node The node address of the option module.