Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module - Manual (Page 3)

Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Added information about the Connected Components Workbench software configuration tool for drives
and connected peripherals. Throughout
manual
In the Chapter 3 subsection ‘Enable Datalinks To Write Data’, revised step 3 for better understanding. 27
In the Chapter 4 sub-subsection ‘Add the Drive/Option Module to the I/O Configuration’, included new
information for the Create Database, Web Update, and Match Drive buttons on the Module Definition
dialog box, which are described in the step 6 table. 41
In Chapter 6 Explicit Messaging, added Table 4. Also added footnotes about limitations when using DPI
Parameter Object Class code 0x93 or Host DPI Parameter Object Class code 0x9F to tables below message
configuration dialog boxes. 74 … 84