Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module User Manual
Page 69
Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012
69
Using the I/O
Chapter 5
Controller Tags
When you add the option module and drive to the I/O configuration
(
), RSLogix 5000 software automatically creates generic (non-
descriptive) controller tags. In this example program, the following controller
tags are used.
You can expand the Input and Output tags to reveal the input and output
configuration. The Input tag for this example program requires nineteen 32-bit
words of data (see
Figure 13
). The Output tag for this example program requires
eighteen 32-bit words of data (see
Figure 14
).
Figure 13 - ControlLogix Controller Input Image for Drive Generic Profile Example Ladder Logic
Program
Figure 14 - ControlLogix Controller Output Image for Drive Generic Profile Example Ladder Logic
Program