Rockwell Automation 20-750-CNETC PowerFlex Coaxial ControlNet Option Module - Manual (Page 57)

Rockwell Automation Publication 750COM-UM003B-EN-P - November 2012 57
Configuring the I/O Chapter 4
6. Expand the communications path from your computer to the ControlNet
bridge.
The following dialog box shows our example navigating to devices on a
ControlNet network. Depending on the communication link you are
using, the navigation path may be different.
7. Click OK after selecting a valid path to the ControlNet network (for this
example, A, ControlNet).
As the selected ControlNet path is browsed, RSNetWorx for ControlNet
software creates a graph view window that shows a graphical
representation of the devices on the network.