Rockwell Automation 193-EDN E1Plus Overload Relays - DeviceNet Module - Manual (Page 24)

Publication 193-UM006A-EN-P – October 2005
3-8 DeviceNet Node Commissioning
Figure 3.7 Editing Device I/O Parameters
Commissioning the
Protection Functions The product should now be configured and communicating on the network.
This section describes the use of RSNetWorx for DeviceNet to configure the
additional protective function settings of the E1 Plus DeviceNet Module. This
can also be accomplished by using a handheld DeviceNet tool.
Using the software, access the Device Parameters tab (see Figure 3.8). Type the
desired setting values corresponding to the motor connected to the E1 Plus
Overload Relay. Make sure that Single is the Online button selected and then
select Download to Device.
Figure 3.8 RSNetWorx Parameter Screen