Rockwell Automation 193-EDN E1Plus Overload Relays - DeviceNet Module - Manual (Page 63)

Publication 193-UM006A-EN-P – October 2005
DeviceNet Information B-11
A single instance is implemented and contains the following attributes:
The following common services are implemented for the Discrete Output
Point Object:
Table B.27 Discrete Output Point Object Instance Attributes
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF
1=ON
5 Get/Set Fault Action BOOL 0=Fault Value
Attribute
1=Hold Last
State
6 Get/Set Fault Value BOOL 0=Off
1=ON
7 Get/Set Idle Action BOOL 0=Fault Value
Attribute
1=Hold Last
State
8 Get/Set Idle Value BOOL 0=OFF
1=ON
113 Get/Set Pr Fault Action BOOL 0=Pr Fault Value
Attribute
1=Ignore
114 Get/Set Pr Fault Value BOOL 0=Off
1=On
Table B.28 Discrete Output Object Common Services
Service
Code
Implemented for:
Service Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single