Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions User Manual
Page 20
Advertising
20 ControlNet-to-DeviceNet Linking Device
Publication
1788-IN052D-EN-P - February 2007
4. To remove the CN2DN linking device from the DIN rail, pull
down on the two latches at the bottom of the device while
pulling the CN2DN device away from the DIN rail.
You may need to insert a flat-head screwdriver between the
DIN rail latch and the tab that locks the latch into place in
order to remove the device.
Pull down on DIN rail latches.
Advertising