Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions - Manual (Page 45)

ControlNet-to-DeviceNet Linking Device 45
Publication 1788-IN052D-EN-P - February 2007
7. If you need to troubleshoot the CommandRegister tags, use
the following table to interpret or change the status associated
with the data bit.
If Bit Bit Name Status Indicates
0 Run Device and Network:
1 = run mode
0 = idle mode
1 Fault Network:
1 = fault present
0 = normal
2 Disable Network Network:
1 = disabled
0 = normal
3 Halt Scanner Device:
1 = halt device (device stops all functions)
0 = normal operation
4 Reset Device:
1 = need to reset device (change to 0)
0 = normal