Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions - Manual (Page 28)

28 ControlNet-to-DeviceNet Linking Device
Publication 1788-IN052D-EN-P - February 2007
DNet I/O Status Indicator
LED Indicator I/O Device Status Recommended Action
Off No connection to device. A. Verify that the
DeviceNet network is
powered.
B. Verify the connected
device is functioning
properly.
Green, flashing Device is in program mode
(idle). To put the device in run
mode, use programming
software.
Green, steady Device is in run mode. To put the device in program
mode, use programming
software.