Module status – Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions User Manual
Page 22
Advertising
22 ControlNet-to-DeviceNet Linking Device
Publication
1788-IN052D-EN-P - February 2007
Module Status
Use the following table to interpret your Module Status LED
indicators and determine if corrective action is necessary.
Module Status Indicator
LED Indicator
Device Status
Recommended Action
Off
No power to device.
A. Verify that the power supply is
functioning properly.
B. Cycle power supply.
C. Remove power and check input power
wiring. Reapply power.
D. Replace the CN2DN linking device.
Advertising