Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions - Manual (Page 8)

8 ControlNet-to-DeviceNet Linking Device
Publication 1788-IN052D-EN-P - February 2007
Two ControlNet connection ports are located on the bottom left side
of the device and provide the availability to connect a redundant
network. See the section titled Connect the CN2DN Device to a
ControlNet Network on page 16 for more information.
For more information about the power port and connector, see the
section titled Wire a Power Supply to the CN2DN Device on page 13.
For more information about the LED indicators, see the section titled
Interpret the LED Indicators on page 21.
Parts List
The following parts are included with the 1788-CN2DN linking
device.
• One 1788-CN2CN linking device
• One power input connector
• One DeviceNet 10-pin linear connector
• Five 121 Ω resistors
• Two end anchors
31670-M
1788-CN2DN
DeviceNet
Connector
Power
Connector
End Anchors
121
Ω Resistors
1788-CN2DN Parts